My Account   01603 720713  

Transmissions V & Wedge Belts Pix Belts Pix Wedge Belt XPA Section
Quick Code: BB-466708

XPA1000 Pix Cogged Wedge Belt (SPAX1000)

£11.92 exc VAT (£14.30 inc VAT)
In Stock   Free Delivery over £100   Next Day Order by 4pm
Buy Now
Product Specification
External Length
Internal Length
Pitch Length
Top Width x Depth
13mm x 10mm
Quick Order Code
Product Description

Commonly used because of the space savings achieved by using these wedge belts. They are used extensively in most of the industrial applications ranging from a light-duty application drive to heavy load applications such as crusher drives.


  • Top width to height ratio: 1.2:1
  • Maximum recommended belt speed: 42 m/s
  • Permissible flex rate f=100 per second

    A moulded raw edge cogged belt comes with moulded teeth on its inner surface. Cogged belts offer more flexibility compared to the wrap construction belts and the tooth profile allows the accumulation of air pockets into it, which acts as heat absorber an prevents the temperature of the drive to enhance, during operation.

    In the case of cogged belts, the teeth which run perpendicular to the belt length, reduces the bending stress over the belt, and so they run cooler and last longer. They have a substantial operational efficiency compared to wrap construction belts. Cogged belts can be used over the same pulleys as equivalently rated wrap construction belt pulley. They are used in a wide array of mechanical devices, where high power transmission is desired.


  • Compressors, Pumps, Fans, Vacuum pumps, Blowers, Generators, Heat exchanger, Industrial drives, etc.

    Key Features
  • Higher power transmission capacity than wrapped v belts
  • Special cog design for enhanced flexibility and heat dissipation rate
  • Suitable for drives using smaller diameter pulleys and high RPM
  • Anti-static, oil & heat resistant
  • Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec)
  • Temperature range: -25°C to +100°C