Bearings
Housed & Flanged Bearings
RHP Housed Bearings
RHP NP & MP Pillow Blocks
Quick Code: BB-96494
MP1 RHP 1inch Pillow Block Bearing
Also Try
RHP SF 4 Bolt Flanged
RHP SFT 2 Bolt Flanged
RHP Short Base Pillow Block
RHP Take Up Units
RHP 4 Bolt Catridge
Buy Now
Qty:
Product Specification
Bolt Hole Centres (J)
108.5/127.5mm
Bore Size (d)
1inch
Brand
RHP
Height (H)
84.3mm
Housing Width (A)
41.5mm
Total Length (L)
160.5mm
Reference
MP1-RHP
Quick Order Code
BB-96494
Product Description
MP1 RHP 1inch Pillow Block Bearing
MP/UCPX heavy duty pillow/plummer bearing unit complete with fully sealed bearing insert. The cast iron housing includes a grease nipple for re-lubrication.
The bearing insert has two grub screws for tightening against the shaft once fitted. The inserts can be removed allowing you to replace with a new insert once required which can be ordered separately.
Product Reviews
Chris H 
27 March 23
Think you might have supplied the medium duty not the heavy duty as required. We wanted BB96494 and not BB10789. RHP numbers indistinguishable from each other, so confusing. Not enough data here about our order to see which bearing was ordered and supplied. Price seems to indicate that we got the wrong one. This bearing now sent on and difficult to check identity e.g. from overall length, 160.5mm being the size of the one we wanted. Something needs to be done to identify these two bearings separately. My Apologies -pillow blocks are NP1 (normal duty) and MP1 (heavy duty) which I overlooked.
27 March 23
Think you might have supplied the medium duty not the heavy duty as required. We wanted BB96494 and not BB10789. RHP numbers indistinguishable from each other, so confusing. Not enough data here about our order to see which bearing was ordered and supplied. Price seems to indicate that we got the wrong one. This bearing now sent on and difficult to check identity e.g. from overall length, 160.5mm being the size of the one we wanted. Something needs to be done to identify these two bearings separately. My Apologies -pillow blocks are NP1 (normal duty) and MP1 (heavy duty) which I overlooked.
