Bearings
Slewing Rings
SEG 20 Metric Series - Solid Section Light Series
Quick Code: BB-162302
SEG5052001AALM Solid Section Light Series Slewing Ring
Also Try
FUN 20 Metric Series - Flanged Light Series
FIG 20 Metric Series - Flanged Light Series
FEG 20 Metric Series - Flanged Light Series
SUN X14 x-roller Metric Series - Solid Section Light Series
SEG X14 x-roller Metric Series - Solid Section Light Series
Buy Now
Qty:
Product Specification
20o spur gear - P
495mm
C (See diagram)
412.5mm
Da (See diagram)
503.3mm
Di (See diagram)
342mm
di H9
344mm
La
455mm
Li
368mm
na
20mm
ni
24mm
U (See diagram)
415.5mm
Weight
31kg
Reference
SEG5052001AALM
Quick Order Code
BB-162302
Product Description
SEG5052001AALM Solid Section Light Series Slewing Ring
Two solid section rings separated by a 20mm ball set, with the outer ring being geared. This series has a constant height of 56mm.
SEG20 Metric Series slewing rings will be manufactured in 42CrMo4 steel. Smaller units are usually produced in 50Mn / C45. Standard SEG20 Series bearings incorporate plastic spacers and has a land riding NBR (nitrile rubber) seal strip. It has a standard 20° pressure angle, uncorrected spur gear cut into the outer ring.
Slewing rings are assembled with a small quantity of Lithium EP2 grease. It is important that all slewing rings are greased during installation and prior to operation. SEG20 Metric Series slewing rings will usually have 4 or 6 grease nipples DIN 71412 M8x1 on the radial face of each ring. Sufficient grease nipples for all holes as well as Nylon plugs (to insert if a grease nipple is not required) are supplied with each ring.
Applications
The SEG20 Metric Series is interchangeable with bearings from other manufacturers such as Roth Erde, Torriani Gianni, INA, Schaeffler, SKF, RKS, RIMA, La Leonessa and many more. However there may be variations to this rule (e.g. OEM variants)
Equivalent to:
Others also ordered
