Transmissions
Shaft Clamping Elements
RCK80 Shaft Clamping Elements
Quick Code: BB-159154
RCK80-6x14 Shaft Clamping Element
Also Try
RCK40 Shaft Clamping Elements
Drivelock Bushes DL Type 11
RCK16 Shaft Clamping Elements
RCK70 Shaft Clamping Elements
RCK11 Shaft Clamping Elements
Buy Now
Qty:
Product Specification
Axial Force
4kN
D1
23mm
D2
25mm
Inside Dia (d)
6mm
L
25.5mm
L1
10mm
L2
19mm
Outside Dia (D)
14mm
Torque Capacity
12Nm
Width (L3)
23mm
X
10mm
Reference
RCK80-6x14
Quick Order Code
BB-159154
Product Description
RCK80-6x14 Shaft Clamping Element
Available for shaft diameters down to 6mm, these shaft clamping elements are designed to fit into small diameter hubs, being particularly suited to light duty, light torque applications. A spacer ring prevents axial movement during clamping; and design ensures good levels of concentricity. For correct operation of these units, the hub diameter should not be less than the flange diameter D2, even though with many materials stress limits would allow selection of smaller hub diameters.
Recommended tolerances for full torque transmission are:-
Shaft h8
Hub H8
X = Distance required to remove screws, additional clearance for allen key may be required.
