Transmissions
Shaft Clamping Elements
RCK80 Shaft Clamping Elements
Quick Code: BB-159757
RCK80-50x65 Shaft Clamping Element
Also Try
RCK40 Shaft Clamping Elements
Drivelock Bushes DL Type 11
RCK16 Shaft Clamping Elements
RCK70 Shaft Clamping Elements
RCK11 Shaft Clamping Elements
1108 Taper Bushes
Buy Now
Qty:
Product Specification
Axial Force
97kN
D1
85mm
D2
92mm
Inside Dia (d)
50mm
L
82mm
L1
50mm
L2
66mm
Outside Dia (D)
65mm
Torque Capacity
2431Nm
Width (L3)
74mm
X
22mm
Reference
RCK80-50x65
Quick Order Code
BB-159757
Product Description
RCK80-50x65 Shaft Clamping Element
Available for shaft diameters down to 6mm, these shaft clamping elements are designed to fit into small diameter hubs, being particularly suited to light duty, light torque applications. A spacer ring prevents axial movement during clamping; and design ensures good levels of concentricity. For correct operation of these units, the hub diameter should not be less than the flange diameter D2, even though with many materials stress limits would allow selection of smaller hub diameters.
Recommended tolerances for full torque transmission are:-
Shaft h8
Hub H8
X = Distance required to remove screws, additional clearance for allen key may be required.
