Transmissions
Shaft Clamping Elements
RCK80 Shaft Clamping Elements
Quick Code: BB-159468
RCK80-19x27 Shaft Clamping Element
Also Try
RCK40 Shaft Clamping Elements
Drivelock Bushes DL Type 11
RCK16 Shaft Clamping Elements
RCK70 Shaft Clamping Elements
RCK11 Shaft Clamping Elements
Key Steel
SPA Section Cast Iron - Taper Lock
Buy Now
Qty:
Product Specification
Axial Force
21kN
D1
43mm
D2
48mm
Inside Dia (d)
19mm
L
44mm
L1
18mm
L2
31mm
Outside Dia (D)
27mm
Torque Capacity
199Nm
Width (L3)
38mm
X
18mm
Reference
RCK80-19x27
Quick Order Code
BB-159468
Product Description
RCK80-19x27 Shaft Clamping Element
Available for shaft diameters down to 6mm, these shaft clamping elements are designed to fit into small diameter hubs, being particularly suited to light duty, light torque applications. A spacer ring prevents axial movement during clamping; and design ensures good levels of concentricity. For correct operation of these units, the hub diameter should not be less than the flange diameter D2, even though with many materials stress limits would allow selection of smaller hub diameters.
Recommended tolerances for full torque transmission are:-
Shaft h8
Hub H8
X = Distance required to remove screws, additional clearance for allen key may be required.
