Transmissions
Shaft Clamping Elements
RCK80 Shaft Clamping Elements
Quick Code: BB-159461
RCK80-11x18 Shaft Clamping Element
Also Try
RCK40 Shaft Clamping Elements
Drivelock Bushes DL Type 11
RCK16 Shaft Clamping Elements
RCK70 Shaft Clamping Elements
RCK11 Shaft Clamping Elements
Plummer Block
Bearing & Industrial Grease
Buy Now
Qty:
Product Specification
Axial Force
9kN
D1
30mm
D2
34mm
Inside Dia (d)
11mm
L
31mm
L1
14mm
L2
23mm
Outside Dia (D)
18mm
Torque Capacity
51Nm
Width (L3)
27mm
X
12mm
Reference
RCK80-11x18
Quick Order Code
BB-159461
Product Description
RCK80-11x18 Shaft Clamping Element
Available for shaft diameters down to 6mm, these shaft clamping elements are designed to fit into small diameter hubs, being particularly suited to light duty, light torque applications. A spacer ring prevents axial movement during clamping; and design ensures good levels of concentricity. For correct operation of these units, the hub diameter should not be less than the flange diameter D2, even though with many materials stress limits would allow selection of smaller hub diameters.
Recommended tolerances for full torque transmission are:-
Shaft h8
Hub H8
X = Distance required to remove screws, additional clearance for allen key may be required.
