Transmissions
Shaft Clamping Elements
RCK40 Shaft Clamping Elements
Quick Code: BB-158972
RCK40-60x90 Shaft Clamping Element
Also Try
Drivelock Bushes DL Type 11
RCK16 Shaft Clamping Elements
RCK70 Shaft Clamping Elements
RCK80 Shaft Clamping Elements
RCK11 Shaft Clamping Elements
RHP NP & MP Pillow Blocks
Buy Now
Qty:
Product Specification
Axial Force
82kN
H
34mm
Inside Dia (d)
60mm
L1
20mm
Outside Dia (D)
90mm
Torque Capacity
2450Nm
Width (L)
24mm
X
22mm
Reference
RCK40-60x90
Quick Order Code
BB-158972
Product Description
RCK40-60x90 Shaft Clamping Element
These are the original type of shaft clamping elements, proven in a wide range of applications for more than 20 years. Suited to more general applications, this series provides medium torque transmission, which can be increased by mounting the unit in series. This type does not provide self centring, and therefore other methods of centring the hub to the shaft are required. The units do not move axially during clamping and generally self-release when clamping screws are relaxed.
Recommended tolerances for full torque transmission are:-
Shaft h9
Hub H9
If two or more elements are used in series the resultant torque will be proportionally increased. However the minimum hub dia. must be increased to accommodate the extra stress.
X = Distance required to remove screws, additional clearance for allen key may be required.
