Transmissions
Shaft Clamping Elements
RCK25 Shaft Clamping Elements
Quick Code: BB-158924
RCK25-150x263 Shaft Clamping Element
Also Try
RCK40 Shaft Clamping Elements
Drivelock Bushes DL Type 11
RCK16 Shaft Clamping Elements
RCK70 Shaft Clamping Elements
RCK80 Shaft Clamping Elements
Steel Boots
Lubricants
Buy Now
Qty:
Product Specification
Axial Force
See spec sheet
B
63mm
Clamping Screw Size
M14
Clamping Screw Torque
190Nm
d
150mm
D
263mm
ds
120mm, 125mm, 120mm
H
7.5mm
I
51mm
L
72mm
Torque Capacity
See spec sheet
Reference
RCK25-150x263
Quick Order Code
BB-158924
Product Description
RCK25-150x263 Shaft Clamping Element
No need for a Torque Wrench with these Clamping elements, just tighten the screws in clockwise sequence in stages until the front faces of the flange and outer ring are aligned. This allows the transmission of torque values shown in the table. This overcomes the problems often encountered where units are either under or over tightened causing failures in transmission. There can also be a time saving in that powered tools can be used for the belt tightening.
Increased torque capacities are achieved by the use of larger screws. The single block design automatically provides parallel setting of the parts, thereby reducing the need for dynamic balancing.
Recommended tolerances
Hub Outside d f7
Hub Bore ds H7
Shaft Diameter ¡Ü 160mm h6
Shaft Diameter ¡Ý 160mm g6
