Shaft Clamping Elements
RCK16 Shaft Clamping Elements
Quick Code: BB-158784
RCK16-50x80 Shaft Clamping Element
Inside Dia (d)
Outside Dia (D)
Quick Order Code
Product DescriptionRCK16-50x80 Shaft Clamping Element
These clamping elements are basically to same design as RCK13, but with increased diameter flange to locate hub and prevent axial movements, so combining good concentricity with positive axial location. The increase in friction between the cones due to axial restriction results in torque reduction of approx 20%, but this also means reduced surface pressures to both hub and shaft.
Recommended tolerances for full torque transmission are:
- Shaft h8
- Hub H8
X = Distance required to remove screws, additional clearance for allen key may be required.