Transmissions Shaft Clamping Elements ACE81 Shaft Clamping Elements
Quick Code: BB-159892

ACE81-19x26 Shaft Clamping Element

£20.88 Was £26.10 exc VAT (£25.06 inc VAT)
In Stock   Free Delivery Available  
Buy Now
Qty:
Product Specification
Axial Force
14.5kN
D1
37.5mm
D2
40.5mm
Inside Dia (d)
19mm
L
31.5mm
L1
14mm
L2
22.5mm
Outside Dia (D)
26mm
Torque Capacity
138Nm
Width (L3)
27.5mm
X
12mm
Reference
ACE81-19x26
Quick Order Code
BB-159892
Product Description
ACE81-19x26 Shaft Clamping Element

Available for shaft diameters down to 11mm, these shaft clamping elements are designed to fit into very small diameter hubs, being particularly suited to timing pulley and overload clutch applications. A spacer ring prevents axial movement during clamping; and design ensures good levels of concentricity. For correct operation of these units, the hub diameter should not be less than the flange diameter D2, even though with many materials stress limits would allow selection of smaller hub diameters.

Recommended tolerances for full torque transmission are:-
Shaft h8
Hub H8

X = Distance required to remove screws, additional clearance for allen key may be required.