Bearings
Housed & Flanged Bearings
RHP Housed Bearings
RHP NP & MP Pillow Blocks
Quick Code: BB-134969
NP30HLT RHP 30mm Pillow Block Bearing (High/LowTemp Insert)
Also Try
RHP SF 4 Bolt Flanged
RHP SFT 2 Bolt Flanged
RHP Short Base Pillow Block
RHP Take Up Units
RHP 4 Bolt Catridge
Buy Now
Qty:
Product Specification
Bolt Hole Centres (J)
108.5/129.5mm
Bore Size (d)
30mm
Brand
RHP
Height (H)
82.7mm
Housing Width (A)
41.5mm
Total Length (L)
160.5mm
Reference
NP30HLT-RHP
Quick Order Code
BB-134969
Product Description
NP30HLT RHP 30mm Pillow Block Bearing (High/Low Temp Insert)
NP normal duty pillow/plummer block flanged bearing unit complete with high/low temperature bearing insert. The cast iron housing includes a grease nipple for re-lubrication. The bearing insert has two grub screws for tightening against the shaft once fitted.
These bearings can operated up to a maximum temperature of +180 deg C and down to a minimum temperature of -40 deg C. Re-greasing is essential for high/low temp inserts using Kluber Asonic HQ72-102 grease.
The inserts can be removed allowing you to replace with a new insert once required which can be ordered separately.
HLT inserts have:
Frequently viewed together
