Shaft Clamping Elements
RCK40 Shaft Clamping Elements
Quick Code: BB-159037
RCK40-170x225 Shaft Clamping Element
Inside Dia (d)
Outside Dia (D)
Quick Order Code
Product DescriptionRCK40-170x225 Shaft Clamping Element
These are the original type of shaft clamping elements, proven in a wide range of applications for more than 20 years. Suited to more general applications, this series provides medium torque transmission, which can be increased by mounting the unit in series. This type does not provide self centring, and therefore other methods of centring the hub to the shaft are required. The units do not move axially during clamping and generally self-release when clamping screws are relaxed.
Recommended tolerances for full torque transmission are:-
If two or more elements are used in series the resultant torque will be proportionally increased. However the minimum hub dia. must be increased to accommodate the extra stress.
X = Distance required to remove screws, additional clearance for allen key may be required.