Transmissions
Shaft Clamping Elements
RCK19 & 20 Shaft Clamping Elements
Quick Code: BB-158864
RCK19-155x265 Shaft Clamping Element
Also Try
RCK40 Shaft Clamping Elements
Drivelock Bushes DL Type 11
RCK16 Shaft Clamping Elements
RCK70 Shaft Clamping Elements
RCK80 Shaft Clamping Elements
2517 Taper Bushes
SPC Section Cast Iron - Taper Lock
Buy Now
Qty:
Product Specification
Axial Force
See Spec Sheet
Clamping Screw Size
M12
Clamping Screw Torque
100Nm
d
155mm
L
72mm
L1
50mm
Max Clearance (dw-di)
0.069mm
Outside Dia (D)
265mm
Shaft Dia Accomodated (dw)
110mm, 115mm, 115mm
Torque Capacity
See Spec Sheet
Width (L2)
64.5mm
Reference
RCK19-155x265
Quick Order Code
BB-158864
Product Description
RCK19-155x265 Shaft Clamping Element
Types RCK19 & 20 are normally referred to as clamping discs, used
to clamp externally onto thin walled hubs to lock them to the shaft.
The design permits the use of large diameter shafts with small hub
sizes, and is popular for connection of large sprocket and pulleys. The
design provides for optimum concentricity, with high torque transmission. A number of shaft diameters can be accommodated by
one size of unit, max., min. and an intermediate being shown in the attributes.
Recommended tolerances:
Hub Outside Ø: h8
*Hub Bore: H6
*Shaft Ø: j6 below 30mm
h6 30mm plus
