Transmissions
Shaft Clamping Elements
RCK16 Shaft Clamping Elements
Quick Code: BB-158794
RCK16-70x110 Shaft Clamping Element
Also Try
RCK40 Shaft Clamping Elements
Drivelock Bushes DL Type 11
RCK70 Shaft Clamping Elements
RCK80 Shaft Clamping Elements
RCK11 Shaft Clamping Elements
Sprag Clutch Bearings
Bolt On Hubs
Buy Now
Qty:
Product Specification
Axial Force
140kN
Inside Dia (d)
70mm
L
50mm
L1
24mm
L2
30mm
Outside Dia (D)
110mm
Torque Capacity
4905Nm
Width (L3)
40mm
X
30mm
Reference
RCK16-70x110
Quick Order Code
BB-158794
Product Description
RCK16-70x110 Shaft Clamping Element
These clamping elements are basically to same design as RCK13, but with increased diameter flange to locate hub and prevent axial movements, so combining good concentricity with positive axial location. The increase in friction between the cones due to axial restriction results in torque reduction of approx 20%, but this also means reduced surface pressures to both hub and shaft.
Recommended tolerances for full torque transmission are:
- Shaft h8
- Hub H8
X = Distance required to remove screws, additional clearance for allen key may be required.
Others also ordered
