Bearings
Housed & Flanged Bearings
RHP Housed Bearings
RHP SFT 2 Bolt Flanged
Quick Code: BB-133364
SFT30HLT RHP 30mm Flanged Bearing (High/Low Temp)
Also Try
RHP SF 4 Bolt Flanged
RHP NP & MP Pillow Blocks
RHP Short Base Pillow Block
RHP Take Up Units
RHP 4 Bolt Catridge
5M Section Timing Pulley (5mm)
TEC Drive IP20 Inverters
Buy Now
Qty:
Product Specification
Bore Size (d)
30mm
Brand
RHP
Height (Z)
42.21mm
Hole Centre (J)
116.5mm
Length (H)
141.3mm
Width (L)
82.6mm
Reference
SFT30HLT-RHP
Quick Order Code
BB-133364
Product Description
SFT30HLT RHP 30mm Flanged Bearing (High/Low Temp)
SFT normal duty 2 bolt flanged bearing unit complete with high temperature bearing insert. The cast iron housing includes a grease nipple for re-lubrication. The bearing insert has two grub screws for tightening against the shaft once fitted.
Made up of MSFT1/SFT4CAS Housing and 1030-30GHLT Insert.
These bearings can operated up to a maximum temperature of +180 deg C and down to a minimum temperature of -40 deg C. Re-greasing is essential for high temp inserts using Kluber Asonic HQ72-102 grease.
The inserts can be removed allowing you to replace with a new insert once required which can be ordered separately.
HLT inserts have:
