|
SKF Cylindrical roller bearing
|
Product Attributes
| Dynamic load: | 56kN |
| Limiting Speed: | 12000-rpm |
| Ref Speed: | 11000-rpm |
| Brand: | SKF |
| Clearance: | Standard |
| Width: | 17mm |
| Outside Dia: | 72mm |
| Inside Dia: | 35mm |
| Static Load: | 46kN |
Further Details about products in our Bearings - Cylindrical Roller range
SKF cylindrical roller bearings.
Technical -
Standard designs of SKF dylindrical roller bearings -
The rollers in a single row cylindrical roller bearing are always guided between the integral open flanges on one of the rings.
These open flanges on the cylindrical roller bearing conbined with specially designed & surfice finished bearing roller ends. This provides improved lubrication, reduced friction consequently lower operating temperature.
The ring with the intergral flanges together with the cylindrical roller & cage assembly can be seperated from the outer ring. This results in easy mounting & dismounting, particularly where the load conditions are such that interferance fits are required for both rings.
SKF single row roller bearings can accomodate heavy radial loads & high speeds. They are manufacturerd in several different designs, the main difference being inconfiguaration of the flanges.
SKF Cylindrical Roller Bearing Designs:
NU Designed Bearing -
The outer ring of an NU design roller bearings has two integral flanges while the inner ring has no flanges. Axial displacement of the shaft inrespect to the bearing housing can be accommodated in both directions.
N Designed Bearing -
This inner ring of a SKF N design bearing has two integral flanges while the outer ring has no flanges. Axial displacement of the shaft inrespect to the bearing housing can be accommodated in both directions.
NJ Designed Bearing -
The outer ring of a SKF NJ design bearing has two intergral flanges & the inner ring has one intergral flange. The bearings can locate the shaft axially in one direction.
NUP Designed Bearing -
The outer ring of an NUP design bearing has two intergral flanges & the inner bearing ring has an intergral flange & one non integral flange in for of a loose bearing flange. These bearings can be used as locating bearings to locate the shaft axially in both directions. |
|
Click to enlarge
Click to enlarge
Truloc Bearing Adhesive
Metric Oilseal To Suit
|
| You may also be interested in these products... |
|
