Bearing Withdrawal Sleeves
|
Product Attributes
| Inside Dia: | 65mm |
| Locknut Dia: | 98mm |
| Total Length: | 43mm |
Further Details about products in our Adaptor Sleeves range
Designs: Adaptor sleeves are the most frequently used components for locating bearings with a tapered bore onto a cylindrical seating as they are able to be used on smooth or stepped shafts.
they are considerablely easy to mount and do not require no additional location on the shaft.
when an adapter sleeve is used on a smooth shaft,the bearing can be located at any posistion on the shaft.
when adapter sleeves are used on step shafts together with a stepped ring,bearings are able to be accuratley positioned axially and bearing dismounting is also facilitated.
Basic design:
Adapter sleeves are supplied and completed with lock nut and locking device.
smaller sizes use a lock nut with a locking washer,larger sizes use a nut with a locking clip.the sleeves are slotted and have an external taper of 1:12. Up to size 40, the sleeves are phosphated. Larger sizes are untreated and protected by a solventless rust inhibitor.
Bearingboys supplie adapter sleeves for metric and also imperial shafts,Bearingboys stock adapter sleeves suitable for both metric and imperial adapter sleeves. please refer to this page on the bearingboys website. |
|
Click to enlarge
|
