|
Product Attributes
| Inside Dia (mm): | 32 |
| Outside Dia (mm): | 36 |
| Width (mm): | 40 |
| Tolerance Min (mm): | 0.050 |
| Tolerance Max (mm): | 0.150 |
Further Details about products in our Igus Iglidur® G Sleeve Bearings - Metric range
Igus Iglidur® G Sleeve Bearings - Metric
The widest range of differing requirements are fulfilled by iglidur® G bearings. That is why this material is rightly termed universal.
Recommended are applications with medium to high loads, medium surface speeds and moderate temperatures.
Dimension according to ISO 3547-1 and special dimensions
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9
When to use iglidur® G bearings?
- When I need an economical all-round bearing
- For extremely high loads
- For low to medium surface speeds
- When the bearing should suit different shafts
- For simple pivoting and rotating movements
- When the bearing should perform extremely multi-sided functions
- For dry operation
- When the bearing should be insensitive to dirt
- For strong vibrations
When not to use them?
- When machining of the wall area is required
- When extremely high wear resistance is required
- When constant temperatures of more than 130°C are present
- For underwater application |
|
Click to enlarge
|
| You may also be interested in these products... |
|
|
|
|
|
Drill Bit Set
 | 115 HSS Drill Set For Only £25.00
|
Click Now
|
|
|
|
Water Gun
 | Heavy Duty Water Gun £39.00
|
Click Now
|
|
|
|
|
