|
Product Attributes
| Inside Dia (mm): | 13 |
| Outside Dia (mm): | 15 |
| Width (mm): | 15 |
| Tolerance Min (mm): | 0.032 |
| Tolerance Max (mm): | 0.102 |
Further Details about products in our Igus Iglidur® G Sleeve Bearings - Metric range
Igus Iglidur® G Sleeve Bearings - Metric
The widest range of differing requirements are fulfilled by iglidur® G bearings. That is why this material is rightly termed universal.
Recommended are applications with medium to high loads, medium surface speeds and moderate temperatures.
Dimension according to ISO 3547-1 and special dimensions
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9
When to use iglidur® G bearings?
- When I need an economical all-round bearing
- For extremely high loads
- For low to medium surface speeds
- When the bearing should suit different shafts
- For simple pivoting and rotating movements
- When the bearing should perform extremely multi-sided functions
- For dry operation
- When the bearing should be insensitive to dirt
- For strong vibrations
When not to use them?
- When machining of the wall area is required
- When extremely high wear resistance is required
- When constant temperatures of more than 130°C are present
- For underwater application |
|
Click to enlarge
|
| You may also be interested in these products... |
|
|
|
|
Hard Hats
 | Hard Hats Available at £3.50 Each
|
Hard Hats
|
|
|
|
|
|
20% OFF
 | Nylon Tubing Metric 20% OFF All Sizes
|
View Now
|
|
|
|
